Our best-selling inert gas oven has been modified to perform heat treatment under a superheated steam atmosphere.
Based on the latest gas control technologies, these models allow atmosphere separation that can finely control the gas composition in the target zone. (Examples: high oxygen concentration in the low-temperature zone, medium oxygen concentration in the mid-temperature zone, low oxygen concentration in the firing zone).
The use of a metal muffle provides these models with excellent soaking performance.
In addition, the good airtightness of the muffle allows the formation of an atmosphere inside the furnace that has excellent stability and reproducibility.
The use of our proprietary Moldatherm heater with excellent heat insulation performance and heating/cooling characteristics results in a system that delivers high-precision temperature control and superior energy savings.
These mesh belt continuous type furnaces are intended for brazing of various metals, glass sealing, and other reducing atmosphere treatments.
The hydrogen atmosphere system equipped with safety mechanism is easy to use.
These compact conveyor furnaces for experiments (R&D) are fully equipped to support all kinds of atmospheres for the manufacture of electronic components including air, N2, and hydrogen (reducing) atmospheres.
The purge chambers installed at the entrance and exit allow excellent stability and reproducibility of the atmosphere inside the furnace.
This product uses a special ceramic chain with excellent heat and wear resistance as the transport conveyor, allowing it to be used for high-temperature treatments such as ferrite sintering, and MLCC firing and reoxidation.
Select from a low- and medium-temperature range ceramic conveyor with heat resistance up to 1200°C, or a high-temperature ceramic conveyor using mullite with excellent high-temperature strength and heat resistance up to 1400°C.
For the muffle as well, select muffleless configuration, ceramic muffle, or metal muffle.
With this series, a high maximum operating temperature of 600℃ is available, together with a nitrogen (N2) atmosphere that yields low oxygen (O2) concentration of 20 ppm.
These products have been delivered in large quantities for degreasing of ceramic parts (*) and various anti-oxidation treatments.
* Separate safety equipment is required. Please contact us from General Inquiries.
It is recommended that these products be used in combination with heater-type exhaust gas treatment equipment.
A heat-resistant, high-performance filter and our unique cooling unit enable high-temperature baking in a clean environment (max. 530°C (max. 500°C for the V model)).
Heat treatments at 20 ppm or lower residual O2 concentrations is available by introducing nitrogen (N2) gas into the chamber.
This equipment is designed to combust and decompose the gas containing organic compounds that is generated during heat treatments such as temporary sintering of ceramics and degreasing of electronic components. This gas, which is discharged from the heat treatment equipment as exhaust gas, has an irritating odor and is combustible.
This equipment adds fresh air to and purifies this exhaust gas at a maximum temperature of 850°C.
Exhaust gas deodorization improves the work environment. We recommend that this equipment be used as a set with an inert gas oven, a degreasing furnace, or a mesh belt type continuous furnace.
JTEKT Thermo Systems produces original continuous ovens that combine a heating chamber that delivers high-level temperature uniformity and clean characteristics with various transport systems. (Products are made to order.)
We can also produce equipment that supports roll-to-roll transport for films and sheet metals such as lead frames.
